Dryer Problems: Inefficiency and Fire

Clothes Dryer Problems Can Lead to Inefficiency and Fire.
This story appeared in my local newspaper the other day about an apartment laundry room that had dryer problems. It occurred to me, being the highly trained home energy auditor that I am, that any clothes dryer that had such a serious problem that it would catch fire, must have been a very inefficient clothes dryer for a long time.

On one hand, this article is about burning down an apartment complex and on the other, it is about energy conservation. It has occurred to me that every dryer that burst into flames has been using a lot more power, for a long time, than it should have been. I think there is a direct connection between an inefficient dryer and dryer problems that lead to a visit by the fire department lg dryer repair pasadena.

Here is the news article from the paper:

“The Fireman responded to the Apartment Complex laundry room where the residents were huddled with a handy exhausted fire extinguisher in hand. The fireman pulled the blackened dryer outside and finished off any lingering hot spots. A second dryer in the laundry room was also damaged by the heat.”

“Fireman speculated the appliance burst into flames when it overheated as a result of a broken dryer belt. A total of two fire engines, one ambulance, and 19 personnel responded to the scene.”

First of all, let’s discuss the news article and the fire. Sounds like the residents did a good job of locating a fire extinguisher and saving the laundry room from greater damage by putting out the fire. After all, the whole complex might have caught fire and burned down completely. The news article gives a good account of the number of fireman that were available to respond. 19 fireman responded to the dryer fire that was already under control. Of course, the fireman probably did not know the fire was under control when they jumped on the fire truck. Besides, what if the fire had spread to the apartment complex and an all out fire-fight was in the works. In that scenario, 19 fireman is the right number.

The article suggests that a broken dryer belt could have been the cause of the fire. Let’s think about this a minute. The dryer belt breaks so the drum stops spinning and the clothes just sit in one place in the drum and heat starts to build up. Inside most dryers, since clothes have a problem with shedding lint, there is usually lint to be found throughout the dryer as a result of the drying cycle.

With what I know about dryers and lint and apartments, there is a real chance that the people living at the apartment complex were more interested in just drying their clothes than actually maintaining and cleaning the lint screen. With the lint screen partially plugged and reducing the flow of air, the dryer runs warmer and longer during the drying cycle. In this warmer atmosphere, the dryer belt breaks down quicker and fails. Now that the belt is broken, the dryer builds up heat as the clothes are not tumbling and the electric motor that is suppose to be spinning the drum is running full speed without resistance.

It’s hard to say which came first – the broken belt or the lint plugged screen and vent. One thing is for sure, if the dryer vent system is restricted and the heat produced by the dryer can not escape, the dryer is going to get hotter and hotter until a little piece of lint somewhere ignites.

That’s brings us to the connection between a burning dryer and energy efficiency. The vent system plays a major role in the energy efficiency of a dryer.

1. The lint screen. Let’s talk about the lint screen first. The lint screen is designed to collect the lint and keep it from exhausting down the exhaust duct where it can cause problems. In most newer dryers, you have to remove and replace the lint screen before the dryer will turn on. This, at least, means you need to see the lint screen before starting the dryer. In older machines, the drying cycle can be started without checking the screen.

The one thing I like about lint and the lint screen is the neat way lint comes off the screen with the swipe of a damp finger. Sorry, but I think that’s kind of cool.

2. The vent ducting. The vent ducting is the secret to an efficient dryer. The easier the warm moist air from the dryer can get through the vent and be exhausted away the more efficient the dryer. It is back pressure within the dryer vent that increases drying time and therefore, increases the amount of power needed to dry the clothes.

The best dryer vent is a smooth round pipe connected together with very short metal screws. The vent is short in length and a straight run to the outside. Nothing to restrict the flow of air or to catch lint. If ever needed, this type of duct is easy to clean.

The worst dryer vent is some sort of plastic flex duct that is held together by long screws that runs fifty feet under the floor, twisting and turning until it finally reaches the outside. The accordion design of the flex duct traps lint, restricts the flow of air, and builds up lint deposits. If needed, this type of duct is impossible to clean and will need to be replaced.

There are just two advantages to the plastic flex duct. One is the cost – it is very cheap. And the other is knowing what probably caused the dryer fire, if and when it occurs.

3. The vent cap. Just after the dryer vent reaches it’s termination, there is a vent cap or hood of some design. The vent cap is designed with a flap or movable baffle. The cap is suppose to open up when the dryer is running and close down when not running. When closed, the flapper closes the opening to the vent and restricts air from blowing back through the duct. The flapper also keeps critters from using the vent as an entrance tunnel for access to your home.

Is Dryer Vent Cleaning Necessary?

Clothes dryer vent cleaning is an easy project yet an activity that not enough home owners do or do not do often enough. Dryer vent cleaning can often be completed by the homeowner but the location of the ducts, length of the dryer vents and other conditions quite often a trained dryer vent cleaning technician is warranted. If your clothes dryer is located adjacent an exterior wall of your house, the dryer duct system might be short enough in which case you can access all of the ducts and clean it sufficiently with a vacuum and brush. In different scenarios hiring a professional is warranted samsung dryer repair pasadena.

Anyone that is familiar with a clothes dryer fully understands that a meaningful quantity of lint is generated and that the lint trap has to be to be cleaned (the quantity of this stuff forever shocks me. Depending on the fabric,the lint trap usually requires cleaning after every load of clothes. Cleaning the lint trap improves air flow in the dryer and lets it operate more efficiently.

The lint trap does not catch all the lint. Some lint escapes through the dryer vents which is vented outside of your house but a certain amount of lint will become stuck in the dryer duct system, particularly in a flexible dryer duct with ridges and in corners in the ductwork as it travels to the exterior vent. The the greater the length of duct work the greater chance of lint not making it all the way to the exterior of your home as the air flow from the dryer deceases the further it has to travel.

A surprising number of house fires are caused every year by dryer hoses that become obstructed by lint. U.S. Consumer Product Safety Commission (CPSC) studies show that more than of 15,000 home fires annually are related clothes dryers with excessive lint build up being suspected in many of these fires. Lint is highly flammable and if dryer ducts get restricted and cannot properly release hot air created by the dryer heat build up can occur and ignite the lint.

To reduce the chance of fires, the CPSC recommends you:

Cleaning the lint trap after every load of clothes.
Clean the dryer vent and all ductwork regularly (this includes disconnecting the dryer from the ductwork).
Check the the vent on the outside of your home while the dryer is operating to make sure exhaust air is escaping. If it is not, the vent or the duct system may be clogged. Clean behind the dryer, where lint can build up. Have a qualified service person clean the inside of the dryer chassis periodically to minimize the amount of lint accumulation. Keep the area near the dryer clean and free of household items.
Replace accordion type hoses with rigid or corrugated semi-rigid metal ducts. Many manufacturers recommend rigid or corrugated semi-rigid metal ducting because they provide better airflow. Flexible plastic or foil ducting trap more lint and are prone to kinks or crushing, which reduces airflow.
Be particularly careful when drying fabric which has been exposed to flammable chemicals such as gasoline, cooking oils, cleaning agents or wood finishing oils and stains. Consider washing items that have been exposed to these chemicals more than once to reduce the amount of the chemicals still on or in the laundry and, preferably, hang dry these clothes. Use the lowest heat setting and a drying cycle that has a cool-down period at the end of the cycle. Additionally, do not leave these items once dried in the dryer or in a pile.

Issues to bear in mind when searching for a dishwasher

Measurement
Choose a dishwasher with a measurement that most closely fits the overall wants of your family. A dishwasher with compact capability contains six serving items and eight place settings, whereas one with customary capability contains over six serving items and eight place settings. Commonplace capability dishwashers typically want an area of 24 inches beneath your countertop.

You also needs to want to contemplate how often the dishwasher goes for use, because it immediately impacts your water and power utilization samsung dishwasher repair pasadena.

Wash Cycles

Gentle, regular, pans and pots are the fundamental wash cycles. Rinse and maintain setting may also be obtainable permitting you to fill the load earlier than the beginning of the washing course of.

It’s preferable to pick out a mannequin with a number of wash cycles, so that you can choose the correct cleansing degree based mostly on the dust of the dishes. A mannequin with power saving setting will save yo cash by consuming much less power and water.

Cycle Time

Common cycle time ranges between 80 and 150 minutes, whereas the cleansing degree shouldn’t be actually influenced by the size of the cycle time.

Vitality Information

Discover out extra in regards to the water and power consumption of the mannequin by checking the EnergyGuide label on it. Commonplace dishwashers use between three and 12 gallons of water for every load with a yearly power consumption of as much as $65. Thus, it is suggested to purchase essentially the most power environment friendly mannequin that’s obtainable in the marketplace.

Filth Sensors

The brand new fashions typically embody dust sensors which regulates the water consumption based mostly on how soiled the dishes are.

Noise

The dishwasher’s noise ranking also needs to be checked, as a less expensive mannequin, which is in any other case absolutely useful, might be fairly noisy.

Design

With the rising reputation of the dishwashers, they’re now obtainable in numerous colours and designs. Fashions in white and black colours are the most well-liked ones. The entrance panel of some mannequin could be personalized to finest match with remainder of your kitchen. The latest fashions embody just one door with a cleaner look.

Self-cleaning Filters

Though these self-cleaning filters are extra handy, they’ll enhance the noise degree of the equipment. As filters are simple and easy to scrub, the existence of self-cleaning filters shouldn’t be actually vital.

Tips on Choosing Refrigeration Repairs Service

Refrigerators are one of the essential kitchen equipments. It is hard to find a modern home without a refrigerator. Like all other appliances, refrigerators also require repairs and maintenance over a period of time. Many times choosing a wrong technician for refrigeration repairs can cause more harm than good. Unqualified technicians could damage the parts of your appliance or faulty repairs could lead to breaking down of the unit more frequently. It is therefore important to choose an apt refrigeration repairs service.

1. Select a service outlet in your close vicinity kenmore refrigerator repair altadena: a glance through online business portals can help you in listing down several refrigeration repairs service providers across the globe. You must always look out for service providers in your neighbourhood because they will have the shortest turnaround time for attending to your complaints. After all you do not want to wait for weeks together before a technician turns up to attend to your refrigerator. There might be instances where your refrigerator requires a part to be replaced; in such cases non-availability of the outlet in your area would delay the repair work as your service provider would have to procure the part from some other city.

2. Opt for repair services from the manufacturer: if your refrigerator is in the warranty period and has developed some problems, you must call the refrigeration repairs service from the manufacturer. Refrigerator units are liable for free servicing during the warranty period. Even if your refrigerator is not in warranty period, it is a good idea to contact the manufacturer’s repair service as this will help you in getting original parts replaced with ease. Technicians from the manufacturer’s end will have more skill in handling your unit as it is their job to do so day in and day out.

3. Reputation of the service providers: Increasing numbers of fraudsters pose as refrigeration repairs service providers and dupe the unsuspecting clients by installing defective parts that lead to frequent break down of the refrigeration unit. It is important to therefore check the reputation of the company that is providing refrigeration repair services. Always opt for a company that is well known in the neighbourhood. You can probably ask your friends or colleagues to recommend a noteworthy repairs technician for the job.

4. Transparency: last but not the least, always hire a technician who is transparent about the job. A technician must tell you what the cause of breakdown of the unit is. He must also suggest if the entire unit needs to be replaced or only replacing certain parts of the refrigerator can help in prolonging the life of the refrigerator. If the technician uses ambiguous terms for explaining the cause of breakdown, ask him to explain it to you in common terms.

Before You Call The Refrigerator Repair Guys: A Few Simple Tips To Fix Your Fridge Yourself

The fridge is your best friend. It’s also one of the most reliable appliances in the known universe. Unfortunately however, there are times when we need to do a little refrigerator repair. Fridges go on the fritz just like anything else does, but before you call the pros, here are a few things you can do yourself that will fix most problems.

The Lights Are Off And Nobody Is Home

Here’s a common problem – You open the door and the light doesn’t come on. Or the light comes on, but something doesn’t seem like it’s working right. You reach your hand in there and you don’t feel that cool air that’s supposed to be humming through there. This means that your fridge isn’t running. Before you call the professionals, let’s see if you can fix it yourself.

First of all, make sure it’s plugged in maytag refrigerator repair pasadena. You’ll slap yourself on the forehead when you pull on that wire and the plug comes rattling around the corner. You’re not the only one – it’s a common mistake. The fridge needs power, and when there’s no light on, that means you’ve got none. If it’s plugged in and still not keeping things cool, there might be something else wrong.

Check The Cold Control

When all systems seem to be working but it’s just not cold in there like it should be, you need to adjust the cold control. It doesn’t take a refrigerator repair person to figure this out. Just reach in the back somewhere and you’ll find a dial. This dial sets the temperature of your fridge. For one reason or another, it’s been bumped to zero and you just need to turn it up again. Set the temperature according to the manufacturer’s recommendation. Otherwise, you’ll run up your energy bill.

Everything’s Frozen!

On the other hand, when you reach in there for a soda and find a hunk of ice in a can, this means that the thing has gone haywire and it’s running too cold. If it’s freezing everything no matter how you adjust the cold control, this means that its internal control mechanism is broken. This is a bit of refrigerator repair that’s going to need a professional with their tool set and experience to fix.

Water Leaking From The Fridge

This looks like a huge refrigerator repair job, but it’s usually a very minor problem. If you find water leaking out of your fridge, this means that something’s wrong with its self-defrosting system. Probably it’s just clogged and this is not allowing it to drain properly. Turn off your fridge, locate the drainage system and give it a good cleaning with baking soda and water. That should clear up the problem.

Some Tips on Do-It-Yourself Washing Machine Repair

Washing machines are not the most complicated machines in the world (by a long shot!), and with a little background knowledge and enterprising spirit you may be able to fix the problem yourself, or at least get a better idea of whether the problem is worth fixing and how extensive it is. Moreover, some people even decide a washing machine should be junked when in fact it may have years of good performance left on it and only needs a minor repair. The opposite situation can also occur – people can spend time and money fixing a machine that should simply be junked. Generally, a 15 year old machine that has been used several times a day is not really worth repairing. You’re much better off getting a new one and starting with a clean slate in those cases, but not in many others ge washer repair pasadena.

All that said, let’s take a look at a few common problems and their causes. If you find your machine is exhibiting some of the following types of behaviors, you may be able to fix these problems yourself rather than calling in a repair man. In this short article there isn’t time to hit all the potential problems, even all the simple ones, but here a few to give you some ideas.

One of the simplest problems is a dead washing machine – a machine that does nothing. This may seem basic, but it is possible to overlook simple things such as whether the machine is plugged in, whether the knob is set to the on cycle, and whether the socket the machine is plugged into is electrified. You can test the latter by simply plugging another appliance in and seeing if it turns on.

Sometimes the machine is dead but it hums quietly. That is, you can tell it has electrical power but no washing action occurs. This may be due to the fact that the washing machine’s water supply hoses are not letting water in for one reason or another. It could be that the taps on the supply hoses appear to be turned but are cheaply made and so the valves in the hoses themselves are not open or are not completely open. You can unscrew them from the machine and check if they are indeed allowing water in. Pipes may also be frozen in the winter. At any rate, the general idea is to check water intake.

The drum does not rotate. This can have a number of different causes such as a jammed or broken belt, or problems with the machine’s motor. Don’t jump to any conclusions but investigate the problem thoroughly before proceeding.

The machine does not go into its spin cycle. This may be caused by the “unbalanced spin protection” feature. Make sure that it isn’t because a single heavy item is in the machine. There could also be a short, a broken wire, or problems with the control system for the fill level.

Leakages while the machine is in use. This usually has causes such as gaskets, hoses, seals, or joints that need to be replaced, or with a pump that is leaking.

If you decide that you must replace a machine, you don’t necessarily have to consider a new machine if it doesn’t fit your budget. You can find used washing machines for sale in many different places, from the same sorts of sources that might sell an upright freezer or cheap tumble dryers.

Choose Repairing Over Replacing to Save Money

The cost of kitchen appliances can be quite high, especially for family households where you can’t realistically get away with buying the smallest, cheapest model available. The problem of how expensive these are to buy becomes a big problem when our washing machine or any other household appliance breaks down.

We rely heavily upon appliances such as washers to fulfill their duties to save us time and effort. If our washing machine broke down then there’s a good chance that we won’t have the time to wash all our families laundry by hand. Many people will panic and go out and buy a new washer straight away, especially if they have had their current one for a number of years and believe that they have got a sufficient amount of use out of it lg washer repair pasadena.

The little known fact though is that by calling a dedicated washing machine repair service could mean that you save a significant amount of money which could be better spent elsewhere. Quite often it is the case that washing machines break down because of a part has been worn out or reached the end of its expected life cycle. The motor is a fine example of this, just like a motor in a car it eventually over time can become less effective or lose power. When this happens there’s a good chance that your washing machine will struggle to spin and eventually not start at all.

Another key part of a washer that can develop faults is the drum and its bearings. Over time some washing machines may not necessarily break down but they can become incredibly noisy or develop a knocking sound. Even washers hidden behind cupboard doors can become a major inconvenience when in full motion, especially if having guests over for dinner.

With the help of a repair service you can replace the motor or any other part that is causing the problem which will typically cost less than a direct replacement and make your tired, old washer as good as new as well as being as quiet as it should be.

By getting your washer or any other expensive household appliance repaired instead of buying a replacement you can prolong the life of your current model and save money on more expensive and needlessly elaborate modern appliances.

After all, if your current washing machine did its job fine up until it broke down then would you have spent the money on replacing it? It is most likely that you won’t have done so, then why should a break down stop you from getting more use out of your appliance? Check out the repair services available so that if and when your appliance breaks down then you know who to call.

Washer and Washing Machine Water Level Control

Regardless of the brand or design of water level switch used on Whirlpool, Maytag, Kenmore, GE, Frigidaire washers, it’s main function is to control the amount of water that enters the tub. As soon as the correct water level is reached in the washer, the switch completes a circuit to the timer motor, machine motor and agitator control.

During the fill portion of the washing machine cycle whirlpool washer repair pasadena, a circuit is completed through the pressure switch contacts to either one or both of the water control valves on the water inlet, permitting water to enter the washing machine.. since the timer motor does not operate until the proper water level is reached, not operating time is lost during the fill process.

Earlier models of washers used a float-type switch to control water level in the washer. Because they are now obsolete we’ll keep our discussion to the pressure-type of water level switches. Modern washers now use a pressure-type switch. A hose is connected to an air bell on the bottom of the outer tub. It then connects to the pressure switch – which is usually mounted behind the control panel. As the washer is filled with water, an air pocket is formed in the plastic hose. As the water rises in the tub, the air pressure in the tube increases until it is sufficient to cause the diaphragm in the pressure switch to actuate the switch contacts; thus, opening the circuit to the water control solenoid, or valve, and stopping the flow of water into the washer. As the water drains out of the tub the air pressure in the hose gradually decreases allowing the pressure switch diaphragm to reset the switch contacts. When these washer pressure hoses split or rupture during a fill cycle your washing machine may overflow water on to the floor and cause unwanted damage.

One cause of overflow that I’ve seen on numerous occasions is a pressure hose clog. Remember, the pressure switch receives air pressure that is generated from the basket water that exerts it’s pressure to the air bell in the outer basket housing. This air pressure is sent to the pressure switch in the upper control panel via a pressure tube, which sometimes gets clogged with undissolved laundry detergent. A simple way to avoid this is to run the laundry cycle in the warm/warm or hot/warm water temperature setting. This will ensure that the detergent properly dissolves and is not deposited in the air-dome or pressure tubing.

The Best Ways to Find a Qualified Appliance Repair

When your refrigerator, oven, or washing machine breaks down, you don’t want to wait to get it fixed. Depending on how serious the problem is and the timing of the breakdown, a broken appliance can be an inconvenience or a major disaster. But what if you’ve just moved to a new city, or you’re interested in changing appliance repair companies? What if you’ve never hired an appliance repair technician in your area before Appliance Repair Van Nuys?

Your first instinct might be to open the phone book or to plug “appliance repair” into a search engine and hope for the best. While both of these strategies will bring up listings of local appliance repair businesses, you can take the search a step further. Try these tactics to find the repair pro who’s right for your needs.

Ask Around

Do you have friends or family in the area who have dealt with broken appliances in recent months? Are you close enough with your neighbors to knock on their door or give them a call? Asking for personal recommendations can save you time and effort in the search for the right appliance repair team. And not only can you get names and contact information, you can ask directly about what matters to you. Did the repairman show up on time? Were repairs completed efficiently and properly? Overall, was your friend or family member satisfied with their experience? Would they hire this company again?

Refine Your Web Search

Searching online for ” appliance repair ” will get you results-but are they the results you need? Try refining your search with more specific keywords. If your fridge is broken, query using “refrigerator repair” instead. If you need repairs done by tomorrow, try plugging “refrigerator repair same-day emergency service,” or something like it, into the search engine. That may pull up only results for refrigerator repair technicians in your local area who offer emergency services, which will save you from having to winnow down the larger list yourself.

Visit Review Web Sites

One of the exciting things about the Internet is that it gives consumers a voice. Even if you don’t personally know anyone in your city who can recommend a washer or dryer repair technician, you can visit Web sites like Angie’s List to learn more about various companies’ services. Companies are often rated with stars, giving you an idea of past clients’ average satisfaction level. You can also read through written reviews, which can be enlightening. Perhaps a company has a history of its technicians showing up late, even though they go on to do good work once they arrive. Is punctuality important to you? If so, this company isn’t right for you, and you can move on in your search.

Different appliance repair companies prioritize different values. For instance, some may strive to keep their prices low at all costs, while others will charge more but promise great warranties, superior workmanship, and speedy service. Doing a little bit of research rather than hiring the first name you come across can ensure that you find the company most likely to meet your specific needs.

How Can Appliances Repair?

Appliances are a wonderful part of modern life. However, they don’t last forever. No matter how much you want that refrigerator, dryer, or oven repair to work and keep your appliance on its feet just a little longer, sometimes you have to say adieu to the old machine and get a new one. Purchasing the appliance isn’t usually that difficult. Getting it into your house and hooked up, however, is a different matter. Don’t put yourself or your appliance at risk. Find out how appliance repair pros can actually see you through the entire installation process so that everything goes right from the very beginning.

If your appliance purchase comes with installation support, wonderful. If it doesn’t, though, calling up a local repair firm that offers installation assistance is a great bet. Since these professionals deal with appliances day in and day out, they’ll know what needs to be done and can get the job completed in a safe and efficient manner. Not all repair companies offer installation help, so you might have to look around to find one that does. Once you do, though, you’ll be sitting pretty with your new appliance in no time Jennair Appliance Repair.

Going with a pro for appliance installation is the best choice you can make regarding your own health in this situation. Don’t risk crushed toes, back problems, or blood pressure spikes by trying to wrangle a large appliance without professional support. Let the people with the tools and the know-how get your new appliance moved into your home and into the right space. You’ll thank yourself later!

Once an appliance is is the right spot, your repair pro will be able to get it hooked up. When you think about it, these experts disconnect and reconnect water and power supplies all the time when they perform work such as dishwasher repair or washing machine repair tasks. That means that they’ll be equipped with all the knowledge and the tools to make the initial connections without difficulty.

Having a pro complete the setup process means that you won’t inadvertently do something that might damage your new appliance, necessitating expensive refrigerator repair or dryer repair work later on. Appliance installation is a situation
in which what we don’t know can hurt us. We may think we’re doing everything right, but one loose connection or uneven surface could spell disaster down the line.

If you get a new appliance and it doesn’t come with installation support, call your local appliance repairs firm to see if they’ll assist you with the installation process. Calling an appliance repair expert at the start of your new appliance’s life will reduce the strain on you and on your appliance in the long run.