Appliance Repair Services

A poorly functioning appliance is a huge inconvenience, as well as being a drain on your financial resources. Find out how an appliances repair pro can help get both of these aspects back on track.

We rely on our home appliances every day. So, when one of them starts acting up, your whole home routine can be thrown out of whack. Additionally, a malfunctioning appliance can also start to eat away at your bank account. The good news is, though, an appliance repair service can help get everything back to the way it should be. Find out how calling an appliance pro at the first sign of trouble can help you in the long run dishwasher repair altadena.

Let’s say that your dishwasher isn’t functioning properly. You’re not sure what’s wrong, but your dishes don’t seem to be getting clean. You start rinsing them even more thoroughly than you did before, but that still doesn’t help. So, you start scrubbing them and, essentially, washing them before you put them in the dishwasher. Before you know it, you’re using–and paying for–double the amount of water and soap that you normally use.

This may not seem like a big deal, but the cost of that extra water and soap can really start to add up. Your utility bills and your grocery bills will end up being higher than they should be. Over time, this added cost can add up to a significant amount. Even more important than that, though, is the time cost that you incur. As the weeks pass, you’ll end up spending far more time than you should trying to help an ailing appliance to do its job.

Calling an appliance pro when you first notice a problem is the best way to circumvent these issues. He or she will be able to identify the problem and perform the necessary dishwasher repair (or stove repair or washing machine repair) quickly and efficiently. This will let you get back to using the appropriate amount of energy and physical resources. It will also restore your appliance to its rightful place as a time-saving apparatus rather than a time-eating one.

In addition those immediate savings, calling an appliance professional when you first notice trouble will also save you money in terms of long-term repair costs. While miracles do happen, it’s not likely that a failing appliance will get better on its own. On the contrary, whatever the problem is will probably get worse and worse, and may even start causing additional failings or malfunctions. The longer you leave it, the worse the situation is likely to get, and the more costly the repairs will be when you finally do call someone in.

In order to prevent this from happening, you should call an appliance pro at the first sign of trouble. Even if the issue turns out to be something minor, getting it taken care of sooner rather than later is the prudent choice. If you find yourself grumbling about having to pay for a refrigerator repair or dryer repair that you think you could have done without, consider how much you like a fully functioning refrigerator or dryer before you let the grumpiness progress into full swing. After all, paying to fix a minor issue now is better than paying to fix a major issue later.

Refrigeration Maintenance, Walk-In Coolers and Freezers

Most refrigerators and walk-ins seem virtually indestructible and problem free, but you’ll get longer life out of yours by following these safety and maintenance tips. Clean the door gaskets and hinges regularly. The door gaskets, made of rubber, can rot more easily if they are caked with food or grime, which weakens their sealing properties. They can be safely cleaned with a solution of baking soda and warm water. Hinges can be rubbed with a bit of petroleum jelly to keep them working well. Dirty coils force the refrigerator to run hotter, which shortens the life of the compressor motor. They should be cleaned every 90 days, preferably with an industrial-strength vacuum cleaner.

Walk-in floors can be damp-mopped but should never be hosed out refrigerator repair pasadena. Too much water can get into the seals between the floor panels and damage the insulation. A refrigerator only works as well as the air that’s allowed to circulate around its contents. Cramming food containers together so there’s not a spare inch of space around them doesn’t help. Also try to keep containers (especially cardboard ones) from touching the walls of the cabinet. They may freeze and stick to the walls, damaging both product and wall. Use a good rotation system: First in, first out (FIFO) is preferable. Or put colored dots on food packages, a different color for each day of the week, so everyone in your kitchen knows how long each item has been in the fridge.

WALK-IN COOLERS AND FREEZERS

A walk-in cooler is just what its name implies: a cooler big enough to walk into. It can be as small as a closet or as large as a good-size room, but its primary purpose is to provide refrigerated storage for large quantities of food in a central area. Experts suggest that your operation needs a walk-in when its refrigeration needs exceed 80 cubic feet, or if you serve more than 250 meals per day. Once again, you’ll need to determine how much you need to store, what sizes of containers the storage space must accommodate, and the maximum quantity of goods you’ll want to have on hand. The only way to use walk-in space wisely is to equip it with shelves, organized in sections. Exactly how much square footage do you need? The easiest formula is to calculate 1 to 1.5 cubic feet of walk-in storage for every meal you serve per day. Another basic calculation: Take the total number of linear feet of shelving you’ve decided you will need (A), and divide it by the number of shelves (B) you can put in each section.

This will give you the number of linear feet per section (C). To this number (C), add 40 to 50 percent (1.40 or 1.50) to cover “overflow”-volume increases, wasted space, and bulky items or loose product. This will give you an estimate of the total linear footage (D) needed. However, linear footage is not enough. Because shelves are three dimensional, you must calculate square footage. So multiply (D) by the depth of each shelf (E) to obtain the total square footage amount (F). Finally, double the (F) figure, to compensate for aisle space. Roughly half of walk-in cooler space is aisle space. Another popular formula is to calculate that, for every 28 to 30 pounds of food you’ll store, you will need 1 cubic foot of space. When you get that figure, multiply it by 2.5. (The factor 2.5 means only 40 percent of your walk-in will be used as storage space; the other 60 percent is aisles and space between products.)

The result is the size of the refrigerated storage area you will need. For a walk-in freezer, simply divide your walk-in refrigerator space by two. Larger kitchens, which serve more than 400 meals a day, may need as many as three walk-in refrigerators for different temperature needs: one for produce (41 degrees Fahrenheit), one for meats and fish (33 to 38 degrees Fahrenheit), and one for dairy products (32 to 41 degrees Fahrenheit). The walk-in is used most often to store bulk foods. Because this often means wheeling carts or dollies in and out, the floor should be level with the kitchen floor.

Finding An Appliance Repair Company

In today’s fast paced world all of us are totally dependent on household appliances. So what happens when a device stops functioning? The only option is to look for an appliance repair company. However, finding the right appliance maintenance company is not an easy task. Here are some tips for finding the right people to help you out. Read on as we share some facts with you.

Tips to Finding the Right Appliance Repair Service Company

The first thing to do is to check with your neighbors or call your friends and family to see if they know of a good appliance maintenance company. It is one of the best ways as you don’t have to check the authenticity of the company as well as what they actually charge for their services. The testimony of relatives, friends or even neighbors will usually suffice kitchenaid stove and oven repair los angeles.

Another way to find the right appliance maintenance company is to search online. There are truly outstanding companies that even offer round the clock appliance repair services. Check their costs carefully to see if there are any extra costs that they may ask for the service.

Try to get some contact details of various local appliance repair service companies. They may not be hot shots but when they are in business for many years is a proof that they are trustworthy. Moreover in case you are looking for fast services, usually the local companies are the perfect solution.

Call your real estate agent. They usually have knowledge of good appliance repair companies and can actually help you.

When you need to find out more about warranty or maintenance service, it is obvious that you only should call the company representative of the actual make your machine is. But even after the warranty is over you can still call them. Big electronic shops and stores have connections with good appliance support companies and can guide you to one of the reliable places where you can get proper service.

When you get the contact details of the repair company, do not hesitate to ask some basic questions. First find out whether they are licensed or not, and how much they charge for the service.

Do not necessarily trust prominent ad banners. These companies tend to charge you more, and their service may not be always that impressive due to a lack of experience.

Appliance Repair Beats Replacement Any Day!

No matter what the source of your appliance troubles, your local appliance installation and repair experts can help you at a fraction of the cost of replacing your unit. Serving all major household and business appliances, your local appliance repair professionals can’t make your chores fun, but they can make them easy again maytag dryer repair pasadena!

If you can’t keep up with the daily demands of your household or business because an essential appliance has stopped working or is not producing the desired results, you don’t have to pay steep prices to replace your malfunctioning unit. Instead, consider the more economical option and call your local appliance repair services shop today.

Prompt appliance repair does more than ensure that your daily tasks are performed conveniently and comfortably. Properly functioning appliances also:

Help ensure good health by providing you with reliable cleanliness
Ensure that your food is kept at safe temperatures, preventing spoilage or freezer burn
Keep your home at safe temperatures throughout periods of extreme weather
Help businesses stay in compliance with building and health codes while providing customers with top-notch service
Make certain that your appliances are not wasting energy, which helps you save money by reducing your energy bill
Benefit the environment because they achieve the desired task more efficiently, without wasting energy on repeating cycles
Your local appliance services shop will be able to perform appliance installation and repair on a number of major residential and commercial appliances, including:

Air conditioner repair (both window units and central air systems)
Dishwasher repair
Dryer repair and washing machine repair
Freezer, wine cooler, and refrigerator repair
Oven, stove, hood, and range repair
Microwave repair
Garbage disposal and trash compactor repair
Your local appliance repair services experts have the experience, tools, and know-how to troubleshoot your appliance, determine the problem, and quickly begin work on the solution. Appliance experts can do it all, whether it means cleaning out the ventilation and ductwork in your central air unit to increase airflow, replacing the flywheel in your garbage disposal to help with grinding, or repairing the float switch on your dishwasher to help your appliance properly fill once again. Your local shop will go the extra mile for you and stop at nothing to bring you the results you need to have your home or business operating at full capacity.

Your local experts know their appliances inside and out and can successfully service a wide variety of makes, models, and brands. If you’re having any trouble with your appliances, from poor service to bad odors and everything in between, call your local appliance repair shop today and enjoy the benefits of quality craftsmanship.

How to Find the Parts That You Need For Your Appliances

Jenn Air appliances became available in the marketplace in 1961 with the debut of the self-ventilated cooktop range. Since their introduction in 1961, they have continued to offer new and well-designed kitchen appliances. Consumers have been notably pleased with the design and quality of Jenn Air Appliances. Some of the more popular stylish appliances that they design include refrigerators, ranges, cooktop stoves, dishwashers and dryers. Jenn Air has changed ownership over the years, once in 1982 when purchased by Maytag, and again in 1982 when sold to Whirlpool whirlpool dishwasher repair los angeles.

COMMON REPLACEMENT PARTS

If you own a Jenn Air Stove or Cooktop range, you can enjoy the benefits of grilling indoors. During the life of the appliance, you may need parts to replace your cartridge, knobs, burners, drip bowls, igniters, bake and broil elements, grates and grills, valves or thermostats.

Your Jenn Air Refrigerator may eventually need some replacement parts to continue functioning at an optimal level. Some of the parts that you may eventually need are knobs, handles, drawers, shelves, water filters, ice makers, gaskets, valves, thermostats and defrost heaters.

A dishwasher isn’t a necessity, but when it breaks down, it sure isn’t fun doing those dishes by hand! Your Jenn Air Dishwasher may eventually need some replacement parts some of which include baskets, dish racks, rollers, wash arms, latches, gaskets, panels, door seals, switches, water tubes and inlets, pumps and valves.

When you Clothes Dryer quits working, it can wreak havoc upon the household! Your teenager is probably having a meltdown because their favorite jeans are washed but not dry! Your repair may be a simple one requiring only knobs, belts, rollers, switches or lint filters Or it may be more complicated and need a heating element, glides, bearings, fuses, thermostats and blower wheels.

WHERE TO FIND JENN AIR REPLACEMENT PARTS

Jenn-Air products are distributed by the manufacturers, but there are several other options for finding authentic replacement parts for your appliance. There are many appliance parts distributors that carry Jenn-Air appliance parts and offer reasonable shipping costs. Some even offer a repair forum where you can ask specific installation questions. Your local hardware store will also be able to order a replacement part for you, but you may be able to save some money by ordering online yourself.

INSTALLATION

Caution should be taken when attempting to install any electrical parts on your appliance. However, the cost savings can be considerable, so if you are a do-it-yourself kind of person, or willing to learn, there are many online repair forums that will guide you through the installation process. Of course, if you don’t feel comfortable attempting the repair yourself, you can certainly hire a certified service repair person to do the work for you. If you know what type of replacement part that you need, it may save you some money to order it online yourself. Then if you are not comfortable installing it yourself, find a family member or friend who has done this type of repair, and ask for their assistance. Most people are more than willing to help and flattered to be asked!

Dryer Problems: Inefficiency and Fire

Clothes Dryer Problems Can Lead to Inefficiency and Fire.
This story appeared in my local newspaper the other day about an apartment laundry room that had dryer problems. It occurred to me, being the highly trained home energy auditor that I am, that any clothes dryer that had such a serious problem that it would catch fire, must have been a very inefficient clothes dryer for a long time.

On one hand, this article is about burning down an apartment complex and on the other, it is about energy conservation. It has occurred to me that every dryer that burst into flames has been using a lot more power, for a long time, than it should have been. I think there is a direct connection between an inefficient dryer and dryer problems that lead to a visit by the fire department lg dryer repair pasadena.

Here is the news article from the paper:

“The Fireman responded to the Apartment Complex laundry room where the residents were huddled with a handy exhausted fire extinguisher in hand. The fireman pulled the blackened dryer outside and finished off any lingering hot spots. A second dryer in the laundry room was also damaged by the heat.”

“Fireman speculated the appliance burst into flames when it overheated as a result of a broken dryer belt. A total of two fire engines, one ambulance, and 19 personnel responded to the scene.”

First of all, let’s discuss the news article and the fire. Sounds like the residents did a good job of locating a fire extinguisher and saving the laundry room from greater damage by putting out the fire. After all, the whole complex might have caught fire and burned down completely. The news article gives a good account of the number of fireman that were available to respond. 19 fireman responded to the dryer fire that was already under control. Of course, the fireman probably did not know the fire was under control when they jumped on the fire truck. Besides, what if the fire had spread to the apartment complex and an all out fire-fight was in the works. In that scenario, 19 fireman is the right number.

The article suggests that a broken dryer belt could have been the cause of the fire. Let’s think about this a minute. The dryer belt breaks so the drum stops spinning and the clothes just sit in one place in the drum and heat starts to build up. Inside most dryers, since clothes have a problem with shedding lint, there is usually lint to be found throughout the dryer as a result of the drying cycle.

With what I know about dryers and lint and apartments, there is a real chance that the people living at the apartment complex were more interested in just drying their clothes than actually maintaining and cleaning the lint screen. With the lint screen partially plugged and reducing the flow of air, the dryer runs warmer and longer during the drying cycle. In this warmer atmosphere, the dryer belt breaks down quicker and fails. Now that the belt is broken, the dryer builds up heat as the clothes are not tumbling and the electric motor that is suppose to be spinning the drum is running full speed without resistance.

It’s hard to say which came first – the broken belt or the lint plugged screen and vent. One thing is for sure, if the dryer vent system is restricted and the heat produced by the dryer can not escape, the dryer is going to get hotter and hotter until a little piece of lint somewhere ignites.

That’s brings us to the connection between a burning dryer and energy efficiency. The vent system plays a major role in the energy efficiency of a dryer.

1. The lint screen. Let’s talk about the lint screen first. The lint screen is designed to collect the lint and keep it from exhausting down the exhaust duct where it can cause problems. In most newer dryers, you have to remove and replace the lint screen before the dryer will turn on. This, at least, means you need to see the lint screen before starting the dryer. In older machines, the drying cycle can be started without checking the screen.

The one thing I like about lint and the lint screen is the neat way lint comes off the screen with the swipe of a damp finger. Sorry, but I think that’s kind of cool.

2. The vent ducting. The vent ducting is the secret to an efficient dryer. The easier the warm moist air from the dryer can get through the vent and be exhausted away the more efficient the dryer. It is back pressure within the dryer vent that increases drying time and therefore, increases the amount of power needed to dry the clothes.

The best dryer vent is a smooth round pipe connected together with very short metal screws. The vent is short in length and a straight run to the outside. Nothing to restrict the flow of air or to catch lint. If ever needed, this type of duct is easy to clean.

The worst dryer vent is some sort of plastic flex duct that is held together by long screws that runs fifty feet under the floor, twisting and turning until it finally reaches the outside. The accordion design of the flex duct traps lint, restricts the flow of air, and builds up lint deposits. If needed, this type of duct is impossible to clean and will need to be replaced.

There are just two advantages to the plastic flex duct. One is the cost – it is very cheap. And the other is knowing what probably caused the dryer fire, if and when it occurs.

3. The vent cap. Just after the dryer vent reaches it’s termination, there is a vent cap or hood of some design. The vent cap is designed with a flap or movable baffle. The cap is suppose to open up when the dryer is running and close down when not running. When closed, the flapper closes the opening to the vent and restricts air from blowing back through the duct. The flapper also keeps critters from using the vent as an entrance tunnel for access to your home.

Is Dryer Vent Cleaning Necessary?

Clothes dryer vent cleaning is an easy project yet an activity that not enough home owners do or do not do often enough. Dryer vent cleaning can often be completed by the homeowner but the location of the ducts, length of the dryer vents and other conditions quite often a trained dryer vent cleaning technician is warranted. If your clothes dryer is located adjacent an exterior wall of your house, the dryer duct system might be short enough in which case you can access all of the ducts and clean it sufficiently with a vacuum and brush. In different scenarios hiring a professional is warranted samsung dryer repair pasadena.

Anyone that is familiar with a clothes dryer fully understands that a meaningful quantity of lint is generated and that the lint trap has to be to be cleaned (the quantity of this stuff forever shocks me. Depending on the fabric,the lint trap usually requires cleaning after every load of clothes. Cleaning the lint trap improves air flow in the dryer and lets it operate more efficiently.

The lint trap does not catch all the lint. Some lint escapes through the dryer vents which is vented outside of your house but a certain amount of lint will become stuck in the dryer duct system, particularly in a flexible dryer duct with ridges and in corners in the ductwork as it travels to the exterior vent. The the greater the length of duct work the greater chance of lint not making it all the way to the exterior of your home as the air flow from the dryer deceases the further it has to travel.

A surprising number of house fires are caused every year by dryer hoses that become obstructed by lint. U.S. Consumer Product Safety Commission (CPSC) studies show that more than of 15,000 home fires annually are related clothes dryers with excessive lint build up being suspected in many of these fires. Lint is highly flammable and if dryer ducts get restricted and cannot properly release hot air created by the dryer heat build up can occur and ignite the lint.

To reduce the chance of fires, the CPSC recommends you:

Cleaning the lint trap after every load of clothes.
Clean the dryer vent and all ductwork regularly (this includes disconnecting the dryer from the ductwork).
Check the the vent on the outside of your home while the dryer is operating to make sure exhaust air is escaping. If it is not, the vent or the duct system may be clogged. Clean behind the dryer, where lint can build up. Have a qualified service person clean the inside of the dryer chassis periodically to minimize the amount of lint accumulation. Keep the area near the dryer clean and free of household items.
Replace accordion type hoses with rigid or corrugated semi-rigid metal ducts. Many manufacturers recommend rigid or corrugated semi-rigid metal ducting because they provide better airflow. Flexible plastic or foil ducting trap more lint and are prone to kinks or crushing, which reduces airflow.
Be particularly careful when drying fabric which has been exposed to flammable chemicals such as gasoline, cooking oils, cleaning agents or wood finishing oils and stains. Consider washing items that have been exposed to these chemicals more than once to reduce the amount of the chemicals still on or in the laundry and, preferably, hang dry these clothes. Use the lowest heat setting and a drying cycle that has a cool-down period at the end of the cycle. Additionally, do not leave these items once dried in the dryer or in a pile.

Issues to bear in mind when searching for a dishwasher

Measurement
Choose a dishwasher with a measurement that most closely fits the overall wants of your family. A dishwasher with compact capability contains six serving items and eight place settings, whereas one with customary capability contains over six serving items and eight place settings. Commonplace capability dishwashers typically want an area of 24 inches beneath your countertop.

You also needs to want to contemplate how often the dishwasher goes for use, because it immediately impacts your water and power utilization samsung dishwasher repair pasadena.

Wash Cycles

Gentle, regular, pans and pots are the fundamental wash cycles. Rinse and maintain setting may also be obtainable permitting you to fill the load earlier than the beginning of the washing course of.

It’s preferable to pick out a mannequin with a number of wash cycles, so that you can choose the correct cleansing degree based mostly on the dust of the dishes. A mannequin with power saving setting will save yo cash by consuming much less power and water.

Cycle Time

Common cycle time ranges between 80 and 150 minutes, whereas the cleansing degree shouldn’t be actually influenced by the size of the cycle time.

Vitality Information

Discover out extra in regards to the water and power consumption of the mannequin by checking the EnergyGuide label on it. Commonplace dishwashers use between three and 12 gallons of water for every load with a yearly power consumption of as much as $65. Thus, it is suggested to purchase essentially the most power environment friendly mannequin that’s obtainable in the marketplace.

Filth Sensors

The brand new fashions typically embody dust sensors which regulates the water consumption based mostly on how soiled the dishes are.

Noise

The dishwasher’s noise ranking also needs to be checked, as a less expensive mannequin, which is in any other case absolutely useful, might be fairly noisy.

Design

With the rising reputation of the dishwashers, they’re now obtainable in numerous colours and designs. Fashions in white and black colours are the most well-liked ones. The entrance panel of some mannequin could be personalized to finest match with remainder of your kitchen. The latest fashions embody just one door with a cleaner look.

Self-cleaning Filters

Though these self-cleaning filters are extra handy, they’ll enhance the noise degree of the equipment. As filters are simple and easy to scrub, the existence of self-cleaning filters shouldn’t be actually vital.

Tips on Choosing Refrigeration Repairs Service

Refrigerators are one of the essential kitchen equipments. It is hard to find a modern home without a refrigerator. Like all other appliances, refrigerators also require repairs and maintenance over a period of time. Many times choosing a wrong technician for refrigeration repairs can cause more harm than good. Unqualified technicians could damage the parts of your appliance or faulty repairs could lead to breaking down of the unit more frequently. It is therefore important to choose an apt refrigeration repairs service.

1. Select a service outlet in your close vicinity kenmore refrigerator repair altadena: a glance through online business portals can help you in listing down several refrigeration repairs service providers across the globe. You must always look out for service providers in your neighbourhood because they will have the shortest turnaround time for attending to your complaints. After all you do not want to wait for weeks together before a technician turns up to attend to your refrigerator. There might be instances where your refrigerator requires a part to be replaced; in such cases non-availability of the outlet in your area would delay the repair work as your service provider would have to procure the part from some other city.

2. Opt for repair services from the manufacturer: if your refrigerator is in the warranty period and has developed some problems, you must call the refrigeration repairs service from the manufacturer. Refrigerator units are liable for free servicing during the warranty period. Even if your refrigerator is not in warranty period, it is a good idea to contact the manufacturer’s repair service as this will help you in getting original parts replaced with ease. Technicians from the manufacturer’s end will have more skill in handling your unit as it is their job to do so day in and day out.

3. Reputation of the service providers: Increasing numbers of fraudsters pose as refrigeration repairs service providers and dupe the unsuspecting clients by installing defective parts that lead to frequent break down of the refrigeration unit. It is important to therefore check the reputation of the company that is providing refrigeration repair services. Always opt for a company that is well known in the neighbourhood. You can probably ask your friends or colleagues to recommend a noteworthy repairs technician for the job.

4. Transparency: last but not the least, always hire a technician who is transparent about the job. A technician must tell you what the cause of breakdown of the unit is. He must also suggest if the entire unit needs to be replaced or only replacing certain parts of the refrigerator can help in prolonging the life of the refrigerator. If the technician uses ambiguous terms for explaining the cause of breakdown, ask him to explain it to you in common terms.

Before You Call The Refrigerator Repair Guys: A Few Simple Tips To Fix Your Fridge Yourself

The fridge is your best friend. It’s also one of the most reliable appliances in the known universe. Unfortunately however, there are times when we need to do a little refrigerator repair. Fridges go on the fritz just like anything else does, but before you call the pros, here are a few things you can do yourself that will fix most problems.

The Lights Are Off And Nobody Is Home

Here’s a common problem – You open the door and the light doesn’t come on. Or the light comes on, but something doesn’t seem like it’s working right. You reach your hand in there and you don’t feel that cool air that’s supposed to be humming through there. This means that your fridge isn’t running. Before you call the professionals, let’s see if you can fix it yourself.

First of all, make sure it’s plugged in maytag refrigerator repair pasadena. You’ll slap yourself on the forehead when you pull on that wire and the plug comes rattling around the corner. You’re not the only one – it’s a common mistake. The fridge needs power, and when there’s no light on, that means you’ve got none. If it’s plugged in and still not keeping things cool, there might be something else wrong.

Check The Cold Control

When all systems seem to be working but it’s just not cold in there like it should be, you need to adjust the cold control. It doesn’t take a refrigerator repair person to figure this out. Just reach in the back somewhere and you’ll find a dial. This dial sets the temperature of your fridge. For one reason or another, it’s been bumped to zero and you just need to turn it up again. Set the temperature according to the manufacturer’s recommendation. Otherwise, you’ll run up your energy bill.

Everything’s Frozen!

On the other hand, when you reach in there for a soda and find a hunk of ice in a can, this means that the thing has gone haywire and it’s running too cold. If it’s freezing everything no matter how you adjust the cold control, this means that its internal control mechanism is broken. This is a bit of refrigerator repair that’s going to need a professional with their tool set and experience to fix.

Water Leaking From The Fridge

This looks like a huge refrigerator repair job, but it’s usually a very minor problem. If you find water leaking out of your fridge, this means that something’s wrong with its self-defrosting system. Probably it’s just clogged and this is not allowing it to drain properly. Turn off your fridge, locate the drainage system and give it a good cleaning with baking soda and water. That should clear up the problem.